Do you need a CNC machine?

From Monkey Wiki, a guide to snowboard construction
Revision as of 21:21, 17 July 2011 by Head Monkey (Talk | contribs) (Created page with "There are a lot of people who see CNC machines and figure that with one they’ll be able to do something faster, or more accurately, or have it do something they can’t do by h...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

There are a lot of people who see CNC machines and figure that with one they’ll be able to do something faster, or more accurately, or have it do something they can’t do by hand. These are wonderful goals, and they are achievable, but like all things in life there are tradeoffs.

First, I’ll say flat out that there’s a big difference between owning a CNC machine, and programming and running a CNC machine. It sounds simple, but lots and lots of people fall into this trap. The machine isn’t magic, and it won’t know anything that you don’t know. It’s up to you to decide how to create your part, and then to program and test the machine. Sometimes it is in fact a whole lot harder and more time consuming to get a CNC machine to do something than it is to just go do it by hand.

First consider carefully whether or not a CNC machine will be able to cut the parts you want to make. A 3-axis CNC machine moves a spinning cutter in 3 dimensions while holding the cutter perpendicular to the work surface. Can you make your part with that, or do you need to tilt the cutter? (5-axis machines exist which would allow tilting, but they are significantly more expensive.) Will you be able to make your part by just cutting one side, or will you need to turn it over? If so, how will you ensure accurate placement of the part when you turn it? How will you hold the part down during the machining process? Can you clamp, screw, or glue the part to the table, or do you need a vacuum table? Do you need multiple cutters to create the part, or just one?

Next consider how you will program the machine. The first step is typically to draw what you want to machine in a Computer Aided Design (CAD) program. After this is complete, you need to create tool paths that specify how the machine moves the cutter in order to create the part. This is called Computer Aided Machining, or CAM, which is why you often hear the term CAD/CAM. It is extremely rare that a part you create in a CAD program can be automatically converted by a CAM program in to tool paths to run a CNC machine. It typically requires someone with experience machining using the cutters and materials to carefully guide the CAM program to construct the correct tool paths, accounting for work holding, the capabilities of the cutter, and the order in which the cuts should be made. This can be a surprisingly time consuming part of the process, and it is often error prone. A mistake in programming here can result in real damage to the machine, because the machine doesn’t know the difference between your raw material, a clamp, or even its own frame. And good CAM software usually costs a few thousand dollars.

Finally, consider whether or not you actually need a robot to cut the part for you. There are three primary advantages to using a CNC machine: accuracy, automation, and repetition. If you need 20 of something, then taking the few hours to program and test the machine may make a lot of sense. If you need 1 of something, then the only advantages the CNC brings are accuracy and automation. So do you need the accuracy? If not, then a CNC machine is likely overkill. Is the part you want to make so intricate that it would take hours for you to make by hand? If so, then it may be reasonable to take a few hours programming it, then let the machine take four more to do the work while you do something else productive.

That’s a lot of factors to consider, but with a little practice and experience they become simpler and simpler. Running a CNC machine really involves a combination of your normal craft (i.e., woodworking) with CAD and CAM, and for a time it will require an equal investment in each.

CNC machines are really great for lots of things. I use mine for the following:

  1. Cutting snowboard cores. Here accuracy is king, and the effort to program the machine is completely worth it because, honestly, you just can’t get the accuracy you need doing this by hand, even with templates to help out.
  2. Cutting mold parts. These are simple shapes, usually cut out of 3/4″ MDF, but I usually need 21 of each one. It it’s a big win to take the time to make a program to cut 21 of these out of a sheet of MDF while I do something else in the shop.
  3. Table saw zero-clearance inserts plates. I cut them out of nice Baltic birch plywood usually 4-6 at a time. I spent an hour measuring the plate that came with my table saw and tweaking the program. Now I can make more of these disposable items anytime I want, and have a few more ready to go in 20 min tops.
  4. Complicated one-off projects, like ornate wall brackets, templates for cutting other shapes, etc. Again, these end up being worth it due to the complexity of the shape. I usually start these in a CAD program anyway, and if they’re 2D then it’s usually reasonable to convert these to a few simple tool paths and let the machine do the cutting for me.