Difference between revisions of "File:CoreShaping BaseCleanup3.JPG"

From MonkeyWiki, a guide to snowboard construction
Jump to: navigation, search
(Note the small divot to the left of the alignment hole above. This was left at a specific offset from 0,0 by the CNC machine using a 1/4" V-grove bit. If for some reason the CNC looses track of where “home” is (this machine has no homing switches) the)
 
(Head Monkey uploaded "File:CoreShaping BaseCleanup3.JPG": Migrated from previous wiki instance)
 
(No difference)

Latest revision as of 17:59, 16 March 2013

Note the small divot to the left of the alignment hole above. This was left at a specific offset from 0,0 by the CNC machine using a 1/4" V-grove bit. If for some reason the CNC looses track of where “home” is (this machine has no homing switches) then we can re-home the machine using the same cutter by carefully lowering it into the center of this divot.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current17:59, 16 March 2013Thumbnail for version as of 17:59, 16 March 20131,280 × 960 (207 KB)Head Monkey (Talk | contribs)Migrated from previous wiki instance
  • You cannot overwrite this file.

The following page links to this file:

Metadata