Note the small divot to the left of the alignment hole above. This was left at a specific offset from 0,0 by the CNC machine using a 1/4" V-grove bit. If for some reason the CNC looses track of where “home” is (this machine has no homing switches) then we can re-home the machine using the same cutter by carefully lowering it into the center of this divot.
Click on a date/time to view the file as it appeared at that time.
|current||16:59, 16 March 2013||1,280 × 960 (207 KB)||Head Monkey||Migrated from previous wiki instance|
- You cannot overwrite this file.