File:CoreShaping BaseCleanup3.JPG

From MonkeyWiki, a guide to snowboard construction
Revision as of 16:59, 16 March 2013 by Head Monkey (Talk | contribs) (Head Monkey uploaded "File:CoreShaping BaseCleanup3.JPG": Migrated from previous wiki instance)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Original file(1,280 × 960 pixels, file size: 207 KB, MIME type: image/jpeg)

Note the small divot to the left of the alignment hole above. This was left at a specific offset from 0,0 by the CNC machine using a 1/4" V-grove bit. If for some reason the CNC looses track of where “home” is (this machine has no homing switches) then we can re-home the machine using the same cutter by carefully lowering it into the center of this divot.

File history

Click on a date/time to view the file as it appeared at that time.

current16:59, 16 March 2013Thumbnail for version as of 16:59, 16 March 20131,280 × 960 (207 KB)Head Monkey (Talk | contribs)Migrated from previous wiki instance
  • You cannot overwrite this file.

The following page links to this file: