A length of edge fit to the base and held in place with a few clamps until the glue dries. Note that the glue has already been applied to the edges and base here. It only takes a small drop on each side of each clamp to hold the edge in place for the rest of the process, and the glue does not get in the way of the bond with the epoxy later.
Click on a date/time to view the file as it appeared at that time.
|current||16:59, 16 March 2013||1,280 × 960 (276 KB)||Head Monkey||Migrated from previous wiki instance|
- You cannot overwrite this file.