Difference between revisions of "File:Edges Bending2.JPG"

From MonkeyWiki, a guide to snowboard construction
Jump to: navigation, search
(A length of edge fit to the base and held in place with a few clamps until the glue dries. Note that the glue has already been applied to the edges and base here. It only takes a small drop on each side of each clamp to hold the edge in place for the rest)
 
(Head Monkey uploaded "File:Edges Bending2.JPG": Migrated from previous wiki instance)
 
(No difference)

Latest revision as of 17:59, 16 March 2013

A length of edge fit to the base and held in place with a few clamps until the glue dries. Note that the glue has already been applied to the edges and base here. It only takes a small drop on each side of each clamp to hold the edge in place for the rest of the process, and the glue does not get in the way of the bond with the epoxy later.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current17:59, 16 March 2013Thumbnail for version as of 17:59, 16 March 20131,280 × 1,707 (432 KB)Head Monkey (Talk | contribs)Migrated from previous wiki instance
  • You cannot overwrite this file.

The following page links to this file:

Metadata