File:Edges Bending2.JPG
From MonkeyWiki, a guide to snowboard construction
Revision as of 17:32, 17 July 2011 by Head Monkey (Talk | contribs) (A length of edge fit to the base and held in place with a few clamps until the glue dries. Note that the glue has already been applied to the edges and base here. It only takes a small drop on each side of each clamp to hold the edge in place for the rest)
Size of this preview: 449 × 599 pixels. Other resolution: 180 × 240 pixels.
Original file (1,280 × 1,707 pixels, file size: 432 KB, MIME type: image/jpeg)
A length of edge fit to the base and held in place with a few clamps until the glue dries. Note that the glue has already been applied to the edges and base here. It only takes a small drop on each side of each clamp to hold the edge in place for the rest of the process, and the glue does not get in the way of the bond with the epoxy later.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 17:59, 16 March 2013 | | 1,280 × 1,707 (432 KB) | Head Monkey (Talk | contribs) | Migrated from previous wiki instance |
- You cannot overwrite this file.
File usage
The following page links to this file:
