File:Edges Bending2.JPG

From MonkeyWiki, a guide to snowboard construction
Revision as of 16:59, 16 March 2013 by Head Monkey (Talk | contribs) (Head Monkey uploaded "File:Edges Bending2.JPG": Migrated from previous wiki instance)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Original file(1,280 × 1,707 pixels, file size: 432 KB, MIME type: image/jpeg)

A length of edge fit to the base and held in place with a few clamps until the glue dries. Note that the glue has already been applied to the edges and base here. It only takes a small drop on each side of each clamp to hold the edge in place for the rest of the process, and the glue does not get in the way of the bond with the epoxy later.

File history

Click on a date/time to view the file as it appeared at that time.

current16:59, 16 March 2013Thumbnail for version as of 16:59, 16 March 20131,280 × 1,707 (432 KB)Head Monkey (Talk | contribs)Migrated from previous wiki instance
  • You cannot overwrite this file.

The following page links to this file: