Difference between revisions of "Joining the halves of a core blank"

From MonkeyWiki, a guide to snowboard construction
Jump to: navigation, search
(Created page with "The final phase of creating a core blank is joining a pair of book matched slices from a stack to form a blank that is approximately 14” wide. The blank will be as long as the ...")
 
Line 1: Line 1:
 
The final phase of creating a core blank is joining a pair of book matched slices from a stack to form a blank that is approximately 14” wide. The blank will be as long as the stack, which will at a minimum accommodate a board 180cm long. We create a small set of blanks each season that will yield a board up to 200cm long. The thickness of the blank is determined by the thickness of the slices, with a goal of at least 0.400” thick to allow for the planing required as a final core is formed.
 
The final phase of creating a core blank is joining a pair of book matched slices from a stack to form a blank that is approximately 14” wide. The blank will be as long as the stack, which will at a minimum accommodate a board 180cm long. We create a small set of blanks each season that will yield a board up to 200cm long. The thickness of the blank is determined by the thickness of the slices, with a goal of at least 0.400” thick to allow for the planing required as a final core is formed.
 +
 +
[[Category:Not Ready]]

Revision as of 15:11, 10 July 2011

The final phase of creating a core blank is joining a pair of book matched slices from a stack to form a blank that is approximately 14” wide. The blank will be as long as the stack, which will at a minimum accommodate a board 180cm long. We create a small set of blanks each season that will yield a board up to 200cm long. The thickness of the blank is determined by the thickness of the slices, with a goal of at least 0.400” thick to allow for the planing required as a final core is formed.